All Products

Hydraulic Shaftless Cardboard Line

l Four arms are symmetrical in two side, it can hold 2 rolls of paper one time l Roll paper lift-lower, clamp, loosen, movement, contraposition operated by Hydraulic l It used pneumatic brake to adjust tension of paper. We are a manufacturing...

Bridge Correction Machine Control System

Technical parameters： Non-contact detection corrugated. High precision correction paper. It does not require any adjustment when the width of the paper changes. Closed-loop control, continuous operation. Full size infrared LED detection, long...

TQ25-1 Heavy Type Conveyor Bridge

Technical parameters： Working width ：2200mm Design speed ：200m/min Bridge layer ：1 layer Working power ：380V 50Hz 9KWStructural feature： The part of the flyover is to lift the single-facer corrugated paper produced by the single-facer machine, lift...

SF-360E Multi-Cassette Positive Pressure Single Facer

Technical parameters： Working width 2200mm Design speed 200m/min Economic speed 120-180m/min Paper feed range 2250--850mm Steam temperature 200℃ Steam pressure 1.2Mpa Working power 380V 50Hz 55KWStructural feature： Main corrugating...

SF-280S Adsorption Single-Sided Machine

General technical parameters: 1. Corrugated roller: phi 280mm 2. Working width: 1200-2000mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 100m/min 5. Corrugated type (UV type or UVV type): A...

Preheater For Corrugated Cardboard Making Machine

Structural features： ★Preheat roller accord with the national standard of the pressure vessal，and enclosed the pressure container certificate and inspection certificate.★Each roller surface after grinding precision grinding and dealing with hard...

High Speed Automatic Splicers

Technical parameters： Working wide：2200mm Link paper speed：200m/min Air pressure：6 bpaStructural feature： The maximum diameter of the applicable paper：1500mm. With the automatic tension control of the original paper holder, the paper can be picked...

R06B Core Paper Preheater

Technical parameters： Working wide:2200mm Diameter of preheat roller :￠600mm Angle adjustment range:0-270° Angle shaft diameter :￠110mm×2 Steam temperature:200℃ Steam pressure:1.2Mpa Working power:380V 50Hz 3PH Motor power:250W...

Preheater For Corrugated Cardboard Production Line

General technical parameters: 1. Working width: 1400-2500mm 2. Preheating roller diameter: ¥ 600mm ¥ 900mm ¥ 1000mm ¥ 1100m Structural features: The preheating roller adopts a butterfly head design, which meets the national standard...

ZJ-V5B Hydraulic Shaftless Mill Roll Stand

Technical parameters：Working wide:2200mmPaper diameter:MAX: 1500mm MIN:300mmPaper width:MAX: 2250mm MIN:800mmWeight capacity:3 TPaper head size:Teeth 3 inches 4 inchesbrake:Spur gear type 4 points pneumaticWorking air pressure:0.4---0.8Mpa Main...

Glue Machine For Corrugated Making Line

Our Glue Machine for Corrugated Making Line is a high-quality and efficient machine designed to streamline the production process of corrugated boxes. With a sturdy construction and advanced technology, this machine is capable of accurately applying...

SM-F Double Sided Machine

General technical parameters: 1. Working width: 1400-220mm 2. Design speed: 150m/min 3. Cooling and shaping length: 4 meters, number of heating plates: 12-16 piecesStructural features: The surface of the heating plate has been ground and chrome...

SM-E Double Sided Machine

General technical parameters: 1. Working width: 1400-2500mm 2. Design speed: 250m/min 3. Cooling and shaping length: 5 meters, number of heating plates: 16-20 piecesStructural features: The surface of the heating plate has been ground and the width...

SF-360E Drawer Single-Sided Corrugated Machine

General technical parameters: 1. Corrugated roller: diameter of 320mm and 360mm 2. Working width: 1200-220mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 320E: 180m/min 360E: 200m/min 5....

SF-320E Drawer Single-Sided Corrugated Machine

General technical parameters: 1. Corrugated roller: diameter of 320mm and 360mm 2. Working width: 1200-220mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 320E: 180m/min 360E: 200m/min 5....

SF-320C Adsorption Single-Sided Machine

General technical parameters: 1. Corrugated roller: phi 320mm 2. Working width: 1200-2000mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 150m/min 5. Corrugated type (UV type or UVV type): A...

ZJ-F Electric Shaftless Paper Holder

General technical parameters: 1. Action mode of the original paper holder: mechanical electric operation 2. Paper clamping range: 1200-2000mm 3. Paper clip diameter: ¥ 1400mm 4. Maximum load on one side: up to 2000Kg. Structural characteristics:...

ZJ-V6BHeavy-Duty Fully Hydraulic Shaftless Paper Rack

General technical parameters: 1. Paper clip range: 1200-2800mm 2. Paper clip diameter: ¥ 1500mm 3. Paper holder spindle diameter: V5B: ¥ 242mm V6B: ¥ 270mm 4. Maximum load-bearing capacity on one side: V5B: 3T V6B: 5T Structural...

ZJ-V5B Heavy-Duty Fully Hydraulic Shaftless Paper Rack

General technical parameters: 1. Paper clip range: 1200-2800mm 2. Paper clip diameter: ¥ 1500mm 3. Paper holder spindle diameter: V5B: ¥ 242mm V6B: ¥ 270mm 4. Maximum load-bearing capacity on one side: V5B: 3T V6B: 5T Structural...

SF-360C1 Adsorption Single-Sided Machine

General technical parameters: 1. Corrugated roller: diameter of 360mm and 405mm 2. Working width: 1200-2500mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 360C1: 200m/min 405C1: 250m/min 5....

SF-405E Drawer Single-Sided Corrugated Machine

General technical parameters: 1. Corrugated roller: diameter of 405mm 2. Working width: 1400-2500mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 250m/min 5. Corrugated type (UV type or UVV...

SF-500 Single-Sided Corrugated Machine

General technical parameters: 1. Corrugated roller: ＜ 500mm 2. Working width: 1400-2500mm 3. Operation direction: left or right (determined according to the customer's factory) 4. Design speed: 350m/min 5. Corrugated type (UV type or UVV type):...

Computer Spiral Knife Cross Cutting Machine

NC-150 Computer Spiral Knife Cross Cutting MachineTechnical parameters: Work breadth:1800mm Design speed:150m/min Economic speed:80-150m/min Minimum paper cutting length:500mm Maximum paper cutting length:9999mm Paper cutting accuracy:The uniform...

Gluing Machine For Corrugated Cardboard Production Line

GM-35 two-layer gluing machineTechnical parameters: Working breadth:2500mm Design speed:350m/min Economic speed:180--280m/min Adjustment range of adhesive amount:0.08-0.6mm Glue roller mesh number:40 lines Preheating cylinder temperature...